15.6" HMI enclosure

304 Stainless Steel HMI Housing, 15.6", for an IMD Panel PC or Touch Monitor + Mini PC

$519.00Made to order

Made to order Lead time confirmed with your order
Rated IP65-type front seal with the display installed, manufacturer rated; not UL listed
Checkout Secure checkout by Industrial Monitor Direct

Display cutout included
Panel PC or monitor + mini PC
304 Stainless Steel
Gasketed rear cover
VESA 100 rear
Optional operator strip

Interactive 3D

Turn it over before you order.

The model follows the configuration you pick above. Drag to rotate, pinch or scroll to zoom.

Show the inside

Loading 3D model…

Details

Specifications

A compact housing with a thin, even border around the display and the opening laser-cut to your exact IMD model. Build it two ways: for an IMD 15.6" panel PC, or for an IMD 15.6" touch monitor with an IMD mini PC on a bracket behind it, which gives you a sealed HMI with the computer you choose inside. A gasketed rear cover comes off for service, cable glands sit underneath, and the back takes a VESA 100 arm, a pedestal or a wall mount. Add the operator strip for four 22 mm pushbuttons, pilot lights or an E-stop.

Built for: IMD 15.6" panel PC, or IMD 15.6" touch monitor + IMD mini PC (IMDRT120 / 121 / 122); devices sold separately
Outside dimensions (H x W x D): 11.69 x 17.64 x 4.13 in for a panel PC; 6.3 in deep for monitor + mini PC; 14.61 in high with the operator strip
Display cutout: Cut to the opening of your exact IMD model; largest 15.6" opening 403 x 252 mm
Material: 304 stainless steel, #4 brushed finish
Rating: IP65-type front seal with the display installed (manufacturer rated, not UL listed)
Inside (monitor + mini PC): Galvanized bracket and adapter plate for the mini PC behind the monitor, short internal cable runs
Rear: Removable gasketed cover, 8 screws, VESA 100 pattern
Cable entry: Two cable glands on the bottom; three with the monitor + mini PC build
Operator strip: Optional: four 22.3 mm holes for 22 mm devices (devices not included)
Lead time: Made to order; lead time confirmed with your order

Drawings & CAD

Nominal body dimensions; confirm critical dimensions before cutting or installing.

Order it with the display

Add the IMD 15.6" panel PC, or the touch monitor and a mini PC, to the same order and we cut and fit the housing for those units. Ordering the housing alone? Name the IMD models in the order note.

304 stainless: is it the right grade?

304 suits indoor washdown, food and beverage lines and most outdoor installs. For coastal air, brine or chlorinated cleaners, choose 316L. Compare 304 and 316L.