Control and electrical enclosures
Hinged, gasketed door and a removable mounting panel, any size from small junction boxes up.
Build your enclosure
Start from a ready-made build or from scratch: every option is on one list, and the 3D model changes as you choose. Then send it to our engineers for a quote.
- From one piece
- Any size, to the millimetre
- Delivered in 10 business days from drawing approval
Loading the builder…
- 01
Start from a ready-made build
A washdown panel, a coastal pump station, a PLC cabinet, a junction box, a PC or HMI enclosure: one click loads a complete enclosure, or start from scratch.
- 02
Change anything and watch it in 3D
Size, material and RAL colour, NEMA type, mounting, door, DIN rails, climate, sun shield and nameplate are all listed below the model, and the model changes as you choose.
- 03
Add cutouts and send it
Cable glands, pushbuttons, pilot lights and an E-stop in a few clicks, or every cutout to the millimetre in the 3D designer. Send it for a quote; we reply with a drawing to approve.
Computer enclosures
An IMD mini PC on an adapter plate inside, and an IMD panel PC in the door if you want one.
HMI and display enclosures
A slim shell around one IMD panel PC or touch monitor, on a VESA arm, pedestal, yoke, desk stand or panel.
Every mounting
Wall feet, pole brackets, floor stands, strut rails, flush and machine mounting, VESA arms, pedestals and yokes.
Wall-mount enclosures are manufacturer-rated NEMA 4X-type / IP66 - not UL listed. HMI enclosures are IP65-type at the front seal with the display installed. Once cutouts are added, the rating of the finished enclosure depends on properly rated components and cable glands being installed in every opening.