8" HMI enclosure

Name: 304 Stainless Steel HMI Housing, 8", for an IMD Panel PC or Touch Monitor + Mini PC
Brand: NEMA4 Enclosure
SKU: IMD-HMI-SS4-8
Price: 319.00 USD
Availability: PreOrder

304 Stainless Steel HMI Housing, 8", for an IMD Panel PC or Touch Monitor + Mini PC

$319.00Made to order

Design your cutoutsHoles, glands, pushbuttons or a display opening on any face, in 3D. We quote it.Start →

Different holes, your own drawing or a quantity quote? Request a quote

Made to order Lead time confirmed with your order
Rating IP65-type front seal with the display installed, manufacturer rated; not UL listed
Checkout Secure checkout by Industrial Monitor Direct

Display cutout included
Panel PC or monitor + mini PC
304 Stainless Steel
Gasketed rear cover
VESA 100 rear
Optional operator strip

Interactive 3D

Turn it over before you order.

The model follows the configuration you pick above. Drag to rotate, pinch or scroll to zoom.

Show the inside

Loading 3D model…

Details

Specifications

A compact housing with a thin, even border around the display and the opening laser-cut to your exact IMD model. Build it two ways: for an IMD 8" panel PC, or for an IMD 8" touch monitor with an IMD mini PC on a bracket behind it, which gives you a sealed HMI with the computer you choose inside. A gasketed rear cover comes off for service, cable glands sit underneath, and the back takes a VESA 100 arm, a pedestal or a wall mount. Add the operator strip for four 22 mm pushbuttons, pilot lights or an E-stop.

Built for: IMD 8" panel PC, or IMD 8" touch monitor + IMD mini PC (IMDRT120 / 121 / 122); devices sold separately
Outside dimensions (H x W x D): 8.39 x 9.98 x 3.92 in for a panel PC; 6.14 in deep for monitor + mini PC; 11.3 in high with the operator strip
Inside dimensions (H x W x D, nominal): 8.27 × 9.86 × 3.74 in (210 × 250.5 × 95.1 mm)
Display cutout: Cut to the opening of your exact IMD model; largest 8" opening 213 x 173 mm
Material: 304 stainless steel, #4 brushed finish
Rating: IP65-type front seal with the display installed (manufacturer rated, not UL listed)
Inside (monitor + mini PC): Galvanized bracket and adapter plate for the mini PC behind the monitor, short internal cable runs
Rear: Removable gasketed cover, 8 screws, VESA 100 pattern
Cable entry: Two cable glands on the bottom; three with the monitor + mini PC build
Operator strip: Optional: four 22.3 mm holes for 22 mm devices (devices not included)
Lead time: Made to order; lead time confirmed with your order

Reference CAD

For the selected configuration: IMD panel PC / Display cutout only IMD-HMI-SS4-8

Reference CAD - nominal dimensions, final dimensions confirmed with your order.

Another format or a custom version? Email us.

Order it with the display

Add the IMD 8" panel PC, or the touch monitor and a mini PC, to the same order and we cut and fit the housing for those units. Ordering the housing alone? Name the IMD models in the order note.

304 stainless: is it the right grade?

304 suits indoor washdown, food and beverage lines and most outdoor installs. For coastal air, brine or chlorinated cleaners, choose 316L. Compare 304 and 316L.

Need something different?

Extra holes, glands or a display opening: lay them out in the cutout designer, or send your drawing for a quote.

Custom version

Request a quote for this enclosure

Extra holes, a different cutout, your own drawing or a quantity quote: tell us what you need and attach a drawing if you have one. Our engineers check it and reply by email with a quote. Custom work is quoted, not priced online; the lead time is confirmed with your quote.

Design your cutoutsHoles, glands, pushbuttons or a display opening on any face, in 3D. We quote it.Start →

Wall-mount enclosures are manufacturer-rated NEMA 4X-type / IP66 - not UL listed. HMI enclosures are IP65-type at the front seal with the display installed. Once cutouts are added, the rating of the finished enclosure depends on properly rated components and cable glands being installed in every opening.